430 Series Regulator
The 430 Series SilcoNert® 2000 treated regulator provides primary pressure regulation of reactive or corrosive calibration mixtures or pure gases in applications requiring an extremely inert wetted finish and stable delivery pressure regardless of inlet pressure. The proprietary, non-reactive amorphous Silicon CVD finish provides excellent inertness for reactive calibration standards and significantly more corrosion resistance than bare 316L stainless steel or other more expensive alloys. With available options installed at the factory, the 430 Series SilcoNert treated regulator may be configured as a single station manifold with or without purge, low-pressure alarm, or multiple inlets.
- Metal-to-metal diaphragm seal prevents gas contamination
- CAPSULE® seat design features integral 360° filtration
- Butt-welded face seal connections provide the highest leak integrity available
- Front and rear panel mountable permits easy installation
- Spectometric helium leak check verifies leak integrity
- Cleanroom assembly eliminates contamination at installation
- Captured vent capable bonnet prohibits exposure in the unlikely event of diaphragm failure
WARNING: This product can expose you to chemicals including Lead, Chromium, Nickel, and 1-3 Butadiene, which are known to the state of California to cause cancer, birth defects, or other reproductive harm. And, this product can expose you to chemicals including Bisphenol A (BPA) which is known to the State of California to cause female reproductive harm. For more information go to www. PSWarnings.ca.gov.